Static Flow Rate: 152lb/hr = 9.42g/s = 1680 cc/min (+/-4%)
Dynamic Flow Rate 2.5ms PW @ 100Hz: 16.9 mg/pulse (+/-4%)
Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required)
Connector: Minitimer (Bosch EV1)
Factory fitted with Viton upper and lower o-rings.

These injectors flow 1600 cc/min at 43.5 PSI ( 3 BAR ) and are fully compatible with alternate fuels and alcohol! Some websites may refer to their flow rating as 160 lb/hr or 150 lb/hr or 1680 cc/min Bosch Low Impedance Injectors. Frequently used in racing, flex fuel applications and alternate fuel applications, these low impedance injectors combine extremely high flow rates with excellent response at low pulse widths! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

This same fuel injector you will also know as Accel, FAST, Marren, etc. as all these companies take this fuel injector and repackage it as their own. Don't pay more money for these when you can get them direct from the warehouse and SAVE yourself $$$!!!

All orders ship immediately with tracking information via www.UPS.com or www.USPS.com